Thursday, April 25, 2019

It's Time!

It is with mixed feelings that I announce the present iteration of the Paducah & Lake Erie is being sold and removed from its current location. The layout (bench work and track) is being taken by David James to Brecksville, Ohio. David, as followers of this blog will remember, has contributed greatly to the building of the railroad over two locations (Ohio and Missouri) and some almost 20 years. It is as much his railroad as it is mine. The remainder - engines, rolling stock, structures, and electronics - will, with few exceptions, be sold to anyone desiring them. A complete list is available by emailing me at linson.bill@me.com.

NOW FOR THE GOOD NEWS (for me at least): I intend to replace the current iteration with a small switching layout. My plan is for a 20-24 inch wide shelf layout, about 8-10 long down one wall, and then adding another 8-10 feet in an "L" configuration. The Winston-Salem "Tar Branch" (Model Railroader, Jan-Apr 2018) is the inspiration for this effort.The plan is to continue DCC control, but switch to NCE, which I have been assured that even I can install and maintain. I plan to use hand-thrown turnouts (at least at the beginning). PRIMARY CAVEAT: the railroad will not have anything that I personally cannot install and maintain. The final "given" is that it will be at a height that I can sit in a drawing table chair on wheels and roll around to operate it. I anticipate having only two engines (one steam and one RS-3). I will start on it as soon as the current layout is removed.

Three primary reasons have led to this decision. First, I will be 80 years old this year, and can no longer stand for lengthy periods, nor squat to reach the lower level; thus, I can't maintain the room-size two-level layout. Second, the electronics have surpassed any semblance of expertise I enjoy, and thus, I have to hire someone to maintain and install the electronics of the railroad. And, third, when the time comes (and I hope that's waaaaaay off), I don't want Sue faced with getting rid of all this stuff.

It has been a great twenty years, and I have learned a lot. I can't begin to list everyone who has been an integral part of this project, both in Ohio and in St. Louis, but a heartfelt thanks to all. The support of Sue has been and is exceptional. I look forward to many years of modeling to come.

This is the final post on this blog; it will be retired. I do plan on starting another blog featuring the new railroad as soon as there's something to report. Thank you all for reading, commenting, and supporting this endeavor over the years.

Tuesday, July 3, 2018

Carving a rock face, first pass

Since my last post (about covering the helix), our Thursday night round robin group - the Gandy Dancers - were here, and when I told them of my plans to cover the exposed pink foam shown below with fascia board, two of them ... Carl Schoeneberg and Rick Pfarr ... encouraged me to carve a rock face. Both said, "Give it try ... just carve away with picks and blades and sharp tools, there's no magic." Carl sealed the deal when he added, "If you don't like it when you're done, you can always cover it with fascia then." Made sense. Friend and great modeler Dave Abeles said in his outstanding blog (https://onondagacutoff.blogspot.com), "There is no way around it - with layout construction, sometimes you just need to make a decision, and move on." Also made sense.


Here is the foam covering the helix as it was when the Gandy Dancers were here. At the far left, one can see where the "front" of the helix was covered over a year ago by John Ellenbracht of St. Louis, and nothing had been done since then. About a month ago, David James of Brecksville, Ohio, stopped by and finished covering the scene as seen here. Finally, I picked up a bread knife, a paint can opener, a screw driver and even a two-pronged tool for digging out dandelions and set about "whacking" and cutting. A good thing to assist the completion is the fact that I have three deadlines to at least show some progress. David is passing through August 7, on his way to the NMRA Convention in Kansas City; the Gandy Dancers return two nights later for a regular meeting; and I committed to doing a "mini clinic" on covering a helix in late September for the Gateway Division (St. Louis) of the NMRA.


This is the first pass at creating the rock face. Admittedly, there is a long way to go. I need to do some serious "gouging" next, and maybe even glue on some rocks that I have on hand. One of the issues will be to not carve too deeply on the foam just left of center in this photo because the railroad helix curves out very close to the outer margin. Following the additional "whacking and gouging", I will paint washes, add ground cover (dirt, bushes, grasses, etc.). I think I am glad that Carl and Rick urged me to try this.


It's a couple of weeks later, and I've done some more carving - note the indentation in the center of the photo. It takes me a while to move forward on tasks with which I have little confidence, and this certainly qualifies. I've also placed several cast rocks in locations to break up ground cover, trees, etc. I've put it off as long as I can so now, ready or not, it's time to bite the bullet and start painting.





Here's the first pass at painting. I mixed two colors - Garden Gate (an olive green) and flat black - roughly 3/1, painted the foam and immediately gave it a coating of sifted real dirt, topped by a light dusting of Woodland Scenics course turf (dark green). Tomorrow, I will give it a light misting of a white glue and water mix (50/50) and work to knock down any shiny spots. Obviously, this is only a first step, to be followed by heavier ground cover, bushes, and trees. I still have to paint the rock face on the vertical side, but that has to wait until the upper regions are complete.

Rock faces, created with Woodland Scenics rock molds and hydrocal are in place. Neighbor Joe Voetter is the molder for these. They're glued with hot glue. Next comes the painting and ground cover to blend them in. That will be followed finally by trees ... lots and lots of trees. It's starting to come together, and every day gets a little closer.

Monday, April 23, 2018

Covering the helix continues

Covering the helix  was partially done a year ago, but a good amount was still exposed, and that exposed area was the first thing visitors saw when entering the room.

Not a pretty site!
This past week, David James -- readers of this blog are well aware of what he means to the P&LE -- stopped by on his way home to Brecksville, Ohio, from a meeting in Kansas City, and completion of the coverup was started. The first phase is the addition of 3/4" plywood on the end, and then the stacking of the pink insulation foam comes next.

David James building up the foam covering. Yes, there is a helix under there.

Basic foam work complete.
Next steps are to cover the pink foam with Sculptamold, paint, ground cover (dirt, various shades of green, course and fine turf), and trees ... lots and lots of trees. The dirt will come from a woods close by, the turf is a Woodland Scenics product, and the trees are Scenic Express SuperTrees. I'm off to a "dollar" store to purchase bowls, sheet trays, spatula, etc., since I've been warned about pirating such items from the kitchen. Check back in a couple of weeks; the goal is to be complete by then.

Sunday, April 15, 2018

Let there be light ...

It's been well over a year since I've posted on this site; not much work has been done on the P≤  what has been done did not lend itself to photography ... or even reporting, for that matter. But, I'm getting back to the railroad and expect to report progress here with some regularity. Here's the first in what is planned to be noteworthy advances.

I have long agonized over how to light the lower level of my two deck railroad. In January this year, an American Flyer modeler named Gary Brandenberger of St. Louis presented a clinic to the Gateway Division monthly meeting regarding the use of LED lights for many modeling applications. One was the use of  LED strip lights. SHAZAM! I thought. Further discussions with Gary led to me purchasing three 10-meter long strips of Daylight White lights by ABI through Ebay and we (primarily David James of Brecksville, Ohio) got them installed this weekend. The three strips, about 32 feet long, were sufficient to light the approximately 100 linear feat of the lower deck. I should note the three strips cost a total of about $90, and took less than two hours to install.

This is the staging yard with the room darkened with the exception of the new strip lights.
The lights come with self-adhesive backing, and although some suggest reinforcing that with a glue of some sort, they seem to be holding well without. My railroad is open grid, built with 2 x 8 sections. The strip lights are attached to the bottom of the 1 x 4s.

The strips are the white light seen in the top third on the photo.
The above photos are with the room lights turned off to better show the lighting provided. The following photo is with the room lights turned on, which will be the normal lighting when running the railroad.


We also hung a couple of helicopters "flying" over Howard Mountain to honor a friend and a grandson, but photos will have to wait until more scenery work is done to the mountain later this week. There's a lot of work to be done on the railroad, but the lighting issue is solved.

Monday, August 8, 2016

Hoosier State ... another trip!

Another trip ... just a short one. Chicago to Indianapolis and back on the Hoosier State. Primary reason for taking this trip was because it travels through much of the portion of Indiana where I spent my childhood in Attica. The railroad runs through Lafayette, Crawfordsville, and Monon, among others.

What's really neat on the four hour journey is that by taking Business Class (there is no sleeper service) one gets seats in the dome car, with our own private chef and made-to-order meals -- dinner on the evening train to Indianapolis and breakfast on the return trip to Chicago. The service, offered as an Amtrak train, is provided by Iowa Pacific, and uses vintage cars, repainted in the color scheme of Illinois Central passenger trains of yesteryear, for no other reason than the railroad owner likes that look. Our dome car, for example, was ex-Santa Fe. Power on the train was a pair of GP 40s, one from New Jersey Central, and the other probably from the New York Central.

We left Chicago at 5:15 pm, and arrived in Indianapolis shortly after 11 pm. After a really short night in a nearby hotel, we returned to the train for the return trip. I would recommend spending at least one day in Indianapolis; the station is right down town in the shadow of Lucas Oil Stadium and other points of interest. Nice trip.

Tuesday, May 3, 2016

Powder River Basin trip

As a rail fan, the prototype is always as fascinating as the model. Such was the case a week ago, when twelve of us (from Ohio, Kentucky, Missouri and even one from Canada) met in Chicago where we boarded Amtrak's California Zephyr for Denver and then took rented cars to the Powder River Coal Basin in Wyoming. We visited the Colorado Railroad Museum in Golden, CO (highly recommended), the Cheyenne WY Depot (also highly recommended), and the Powder River Basin.

The Black Thunder Mine, owned by St. Louis company Arch Coal, is the largest (based on production) coal mine in the world. It's all surface mining here.
Until the coal mining depression (thanks to cheaper natural gas, low cost crude oil, and depressed foreign markets)  hit a couple of years ago, more than 100 trains of 125-plus cars left this area daily. That number is now often fewer than 30 trains a day. Train loading never halts, as the empty trains enter the balloon track queue, proceed through the loaders, and depart, all without stopping.



The Cheyenne Depot, built in 1886, continues its renovations started in 2011. It includes the restored waiting room, an extensive museum, a large model railroad depicting Wyoming railroading of yesteryear, and an enclosed second floor observation area overlooking the UP yards. Passenger service has not come through Cheyenne since the 1970s, but this is a large yard, serving the UP, and a crew change point on the railroad.



It wasn't all museums and coal mines; we also found time to get trackside. Here a UP stack train races west towards its crew change at Cheyenne, only a couple of miles away.

Even in late April, weather impacted our trip; we were unable to get to the famous Sherman Hill on the UP as snow and fog closed down I-80 between Cheyenne and Laramie the day we were in the area and planning to film long UP freights working up the hill that has drawn rail photographers for more than 100 years.

It was a good trip, and visiting the Powder River Basin is a checkmark on my personal bucket list.

Thursday, April 21, 2016

The eagle has landed

A pair of eagles, to be known as Joe and Evelyn, have set up residence on Howard Mountain and are watching over their two eaglets.

The nest is the fine modeling of Jim Adkins of Orrville, Ohio (home of Smucker's Fine Jams and Jellies). Jim is an outstanding modeler of miniatures in already small scenes, such as the tools on a workbench in an HO scale garage, etc. The tree is a Scenic Express Super Tree.

Monday, April 18, 2016

Helix progress, harbor added

The helix cover is about done. All that remains are some trees, foliage and ground cover. I will do that within the next couple of weeks.


I purchased a small harbor from the late Bob Weinman's railroad. Bob was an exquisite modeler, and loved water scenes. The large harbor on his model railroad was taken out intact for his wife Libby. My intended use for this harbor is that coal/coke will be brought in by barge for the steel mill that will occupy the entire 16-feet long peninsula stretching out behind it. Bob scratch built the barges; the tow boat is a kit.


Paducah scenes revisited

These photos appeared in a post on a previous blog, but I'm reposting so you don't have to go back and forth to see the finished pieces of the railroad. The three hotels pictured here are not prototypical to Paducah; however, the names are authentic to that western Kentucky city.

Left to right are the Hotel Paducah, the Irvin Cobb Hotel, and the Jackson House. The park in front is Noble Park, also a name authentic to Paducah.

Another view of the hotels, the street in front, and a fourth building housing a business yet to be named.

This is the Freytag Engine Shop, in my mind the signature structure on the layout. It was built by the late Dean Freytag, MMR, specifically for the P&LE, and is thought to be the last major project by the iconic modeler.


The Tortoise and SwitchMaster turnout motors on the P&LE are controlled by IntuiSwitches, developed by Shelly Levy of the Kansas City area. They are push button and lighted route switches, and my primary reason for using them is they are flush mounted. The upper photo shows a custom-made yard panel; the lower photo is of two individual machines.

Monday, April 4, 2016

Slowly, but surely ...

Slowly, but surely, we're getting the helix covered. This provides an idea of what it will look like when completed. 

When completed, the tree line at the upper left will be blended into the rest of the scenery, and the tunnel portal will be finished. Obviously, the top third of the covering still has to be finished, as well. I awoke with a start in the middle of the night ... "did we ever check tunnel portals to assure double stacks would clear?" They will! Whew!

Monday, March 28, 2016

Continuing on covering the helix

Work continues on covering the helix and we're getting closer to completion. Just a bit more painting to do, and then we're ready for ground cover and foliage.


Below is a rock face, poured into molds, and then glued on to and blended into the pink foam material we're using for the scenery. All the other rock faces in both photos are carved directly into the pink foam and then painted. Carving and painting are by John Ellenbracht.

When this work is complete, in a couple of weeks, this end of the railroad will be pretty much finished. This will provide what I think will be "signature scenes" at each end of the P&LE, i.e., this cover of the helix on one end (forming Howard Mountain), and the Freytag Engine House at the opposite end in Paducah.

Tuesday, March 8, 2016

Covering the helix continues

We continue building up the cover for the helix. We have about one or two of the 1 1/2-inch layers of the pink foam to go followed by a cover. Then will come the landscaping (forest, rock faces, ground cover, etc.).

When this is finished, this end of the railroad's upper level will be pretty much complete. The coal tipple from previous scenes is just out of sight to the left on the upper level.

Monday, February 22, 2016

Covering the helix, Part 2

Progress continues on covering the helix, and WE THINK we can get it completed in the next week or so. Most of the carving of the foam board is complete; obviously, the helix still has to be covered, and it all has to receive its foliage, ground cover, and rock facings.

When this is finished, most of both ends (helix/coal mine on one end, and Paducah on the opposite end) of the railroad will be complete, although detailing of all areas will continue for some time.

Tuesday, February 9, 2016

Covering the helix

We have started covering the helix, and there is obviously a lot of work to do. The helix is located at one end of the railroad, nearest the door into the railroad room. The coal tipple seen in previous photos is on the upper level and just to the left of this image.

The top of the helix can be seen in the background. Track seen here is visible between what will be two tunnel portals, and is headed down to the lower level. Material here is 1 1/2"pink insulation foam board. John Ellenbracht is doing the work.

Monday, February 1, 2016

In Review ...

A combination of me (about 70%), Blogger (15%) and Google (15%) served to make access to my former blog (Paducah and Lake Erie) unavailable for me to update, and the easy way to solve that problem is to create still another blog, so here it is. A quick review of recent posts includes the background and corner of the coal tipple.


The Paducah and Lake Erie was conceived as a coal-hauling short line set in southwestern Pennsylvania; this is the primary loading facility on the railroad. The forest is created with a combination of Scenic Express Super Trees, MicroMark poly fiber, and Timberline Scenery Co. ground foam/foliage, all mounted on pink insulation foam board. The rock wall in the scene is carved into the insulation board and painted with acrylics. Ground cover is a combination of Woodland Scenics fine ballast cinders, Scenic Express fine natural soil and dirt and the ground cover/foliage as used in the forest. Mounds are created by stacking and carving the insulation material. The track is painted with black semi-gloss Rustoleum.

One of the features of the railroad is "Friend's Corner", described in greater detail in the previous blog. Three of the structures, so far, named for and honoring friends are Nancy's Diner, Heyl Classic Cars, and Silverberg's Estate Jewelry.

Silverberg's Estate Jewelry specializes in antique cuff links. Note, that Nancy's Diner is seen in the background. Across the street, not in the photo, are Heyl's Classic Cars and an as-yet-unnamed business.

Nancy's Diner and Heyl's Classic Cars. This corner, "Friend's Corner", is closest to the door coming into the railroad room. Just behind Nancy's, across the mainline, is the Freytag Engine Shop, built by and named for the late iconic modeler, Dean Freytag, MMR.

The James Creek Railway is named for David James, whose family owns and operates Brecksville Road Transit in suburban Cleveland, Ohio. David is an outstanding modeler who did a lot of work on the second iteration of the P&LE in Ohio, and has come to St. Louis several times to assist with the current project. The James Creek was a branch line to the coal mines on P&LE v. 2; on the current project, the branch line is off line, and the power will work the coal tipple.